Part No G101

High strength, super flexible glue which sticks equally well to metal, plastic and Renthal Grips. The unique flexibility of the glue prevents shearing of the bond between the grip and the twist-grip or handlebar under sudden loading. 
 

IMPORTANT WARNING
RENTHAL GRIP GLUE MAY NOT WORK WITH CERTAIN OTHER MANUFACTURERS GRIP COMPOUNDS.
 

Grip Glue Fitting Instructions

•  Make sure all surfaces are clean and dry.
   
•  Apply glue generously to handlebar, barrel of twist grip and inside flange ends of grips. (With open-ended twist grips avoid getting this glue into open end).
   
•  Install grips IMMEDIATELY, rotating approximately half a turn to ensure that glue is evenly spread.
   
•  Wipe off surplus glue at flange end.
   
•  ALLOW 8 HOURS TO DRY. IMPORTANT: DO NOT MOVE WITHIN DRYING PERIOD.
   
•  After drying period make sure that twist grips turns freely. If any friction is felt because of solidified excess glue - remove with a sharp knife.